Thursday, 18 December 2014

Bullgryn WIP with painting steps

Hello everyone!

I am finally reunited with my paints and some of my models! Hurrah!

Some brave guardsmen and some bone 'eaded bullgryns traversed the wintery wasteland of the Terran continent Europa Majoris and have safely arrived at their new barracks. Their journey was inexplicably delayed for several weeks due to warps storms and they have been screened for heresy by the commisariat.

There is plenty finally for me to paint in my new home and so tonight I decided to get back to it and to get started on something a little different with the bullgryns.

 photo IMG_2088_zpsd2f188e2.jpg

There are going to be a lot of photos following which show stage by stage the process on a couple of ogryn so words will be sparse until the end. I'll include the brush and paint details as I go however.

I gave the colour scheme some though and eventually settled on mixing my tank painting with my infantry painting. All the big armour was going to be painted in the same method as my tanks and the fatigues in the same colours as the infantry. A bold move. Would it work? lets find out...

 photo IMG_2090_zps62dceb87.jpg

Stage 1 XV88

I used a nunber 2 windsor newton brush for this model unless otherwise specified. It's one of the larger brushes but keeps a great point. I'm not such a fan of smaller brushes.

 photo IMG_2091_zpsfa3b4550.jpg

 photo IMG_2092_zpsfee3d0ad.jpg

 photo IMG_2093_zps38288615.jpg

 photo IMG_2094_zps095b8394.jpg

50/50 mix reikland fleshshade and nuln oil

 photo IMG_2095_zps44239032.jpg

 photo IMG_2097_zps0cf4fb4f.jpg

 photo IMG_2098_zpsb3d43709.jpg

 photo IMG_2099_zpsefc0355f.jpg

Paints just in case we forget what they look like...

 photo IMG_2100_zps54fab3f7.jpg

Drybrush of XV88 using the GW tank brush.

 photo IMG_2101_zps2f9a55bf.jpg

 photo IMG_2102_zpsf9d623a4.jpg

 photo IMG_2103_zps6bf82695.jpg

 photo IMG_2104_zps91936f36.jpg

Drybrush of Baylor brown using the GW tank brush

 photo IMG_2105_zpsf46e3e7d.jpg

 photo IMG_2106_zps4477b286.jpg

 photo IMG_2107_zpsab030e63.jpg

 photo IMG_2108_zps248b7b22.jpg

 photo IMG_2109_zps3b6eebae.jpg

Drybrush of Ushabti bone using the GW tank brush (wait does the tank brush still exist? Its essentially a very large drybrush).

 photo IMG_2110_zpsacd2dfd8.jpg

 photo IMG_2111_zpsdacd2f5d.jpg

 photo IMG_2112_zpsf3196cb0.jpg

 photo IMG_2113_zpsa5e25f17.jpg

Washed once again with the 50/50 mix used earlier

 photo IMG_2114_zps21f1cb4c.jpg

 photo IMG_2115_zpsb2e42da7.jpg

 photo IMG_2116_zpsc7d858ab.jpg

 photo IMG_2117_zpsaf931146.jpg

Cadian fleshtone (tallarn flesh's replacement though I'm not entirely sold on it). Don't worry I'm not painting him naked, I used the same base colour for the skin as the uniforms. I find it works well and makes my infantry that bit quicker and easier.

 photo IMG_2118_zpsf6a9cec4.jpg

 photo IMG_2120_zps9cef969c.jpg

It looks like I missed a stage. Apply reikland fleshshade to the model and then when dry apply a 50/50 cadian fleshtone, ushabti bone mix leaving the washed colour in the recesses.

 photo IMG_2121_zps57498ee3.jpg

Now use ushabti bone to highlight.

 photo IMG_2122_zps46506b17.jpg

 photo IMG_2126_zps6a9fbc91.jpg

and finally add some white to the ushabti bone for the final highlight.

 photo IMG_2128_zps21d9bdb5.jpg

There you go that's where we are up to for now. I'm pleased so far, when I start adding in the black and paint the flesh it'll really come together.

The plan will be to weather the armour just like my tanks too. All the belts etc will be white like my infantry and there will be some red somewhere as its another of my colours for the army.

Word of advice if you decide to paint up some bulglryns, their poses are a pain for painting as it leaves lots of almost impossible bits to reach, particularly with the armour as it clips on like a shell over the usual torso. Try and paint it off if possible but it would mean having the model armless too due to the way it is constructed.

I hope this was both useful and interesting. If you would like me to post the next part in the same manner please do let me know. It'll likely be two weeks before that will happen due to Christmas and the fact I will once again be in a different country to my hobby stuff... Bah humbug.

If I don't post again before, Merry Christmas everyone!